To Order:
We will be adding online shopping soon. For now, please email (flintstonestudios@wi.rr.com) or fax (414-425-4828) with credit card information.
Flintstone Studios
PO Box 371
Hales Corners, WI 53130414-425-9592 Phone
414-425-4828 FaxYou can also email us at:
You may also send an email or fax to request the complete catalog for the cost of $5.00. We will also be adding an PDF catalog for you to download online soon.
Download the order form by click here. You will need Adobe Acrobat Reader which can be downloaded here.
Working with Resin and Pewter Kits
CLEANING - Before using, parts must be washed off with soap(Westleys white wall cleaner), and alcohol to remove mold release.
WARPING - If part is warping or bent, use hot (NOT BOILING) water to help pull it back into shape. Then use cold water for it to "take a set" as you would with a plastic kit.
BODY WORK - After cleaning, the parts may be sanded, filled or drilled. Small imperfections or air bubbles can be filled with super glue or 5 minute epoxy.
PAINTING - Primer coats of automotive primer are recommended on all parts before painting. Hobby paints, enamel and automotive lacquers work fine for finish coats.
STRIPPING PAINT - Some strippers may damage the resin parts, test a small area first. You may use lacquer thinner, Easy-Off oven cleaner, and some brake fluids.
GLUING - Use super glue or 5 minute epoxy.
PHOTO-ETCH - Cut off the tree with a sharp scissors.
PEWTER - Can be buffed with steel wool, fine grit sandpaper, polished with chrome polish. Seal surface with clear coat.
WINDOWS - Trin carefully with scissors.
Always use respirator dust mask when sanding resin parts.
TEST FIT ALL PARTS BEFORE PAINTING AND FINAL ASSEMBLY!
